Xmini 14 electric aerial platform

• • 100% hydraulic basket controls in order to grant the maximum reliability and to allow great accuracy in movements.
  • For a longer and guaranteed service life of the hydraulic system all the switchable controls by the basket and all the hydraulic hoses positioned inside the booms that reach the distributor in the turret work in low pressure 25 Bar.
  • Emergency controls from the ground.
  • The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual maneuvers with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical components caused by rainy weather, humidity, frequent use, etc.
  • The stop valves are directly mounted on each hydraulic cylinder.
  • Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers, respectively positioned in the following controls panels:
  – basket: platform control board
  – carter: platform control board for emergency only
  – subframe: outriggers control board

• • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggersare not completely stabilised.
  • Boom and outriggers block when the PTO in the cab is not engaged.
  • No need of any device to limit lateral outreach (100% SAFE): the operator can safely move within the whole working area with no need of any specific device that limits movements. Thanks to special design of our model, EVERY working position you can reach with the basket is ALWAYS inside the safe working area.
  • Emergency hand pump allows every movement in case the main pump is damaged; it allows the return of the boomand outriggers in rest position; under truck flat battery condition.
  • All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil inlet and outlet from the cylinder.
  • Magnetic yellow flashing beacon mounted on the vehicle cab.
  • Warning light installed in the truck cab and indicating that the outriggers are not completely down.
  • General emergency stop push-button (basket and ground).
  • Thermal protective device for the electric system.
  • Safety device to prevent the starter connection if the engine is on.
  • Boom-cab anti-collision system (buzzer and stop).

• • Aluminium basket dim: L1000xW700xH1100 mm – Fixed type
  • 100% hydraulic system that allows 2 simultaneous movements
  • Constant and gradual automatic leveling of the basket with independent hydraulic circuit
  • Engine start & stop from the basket
  • Warning light to center the boom in rest position
  • Electric power tap in the basket 230V with relative electric power tap in the turret
  • Basket access bar with closing system by gravity
  • Feet protective device h 15cm
  • No. 2 hooks for safety belts
  • Ladders to easily access the basket

• • No. 4 IN-SHAPE outriggers A+A TYPE with individual controls
  • 100% hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
  • Hydraulic distributor made of No.4 levers to simultaneously or individually open / close the outriggers
  • Consent warning lights for outriggers
  • Warning lights for the proper closing of the outriggers to safely drive on the road

• • ELECTRIC CLUTCH AND HYDRAULIC PUMP
  • Warning light inside the cab to indicate electric clutch activated
  • Hour counter in the cab to check the working hours and the frequency of the scheduled tests

• • Aluminium deck
  • Rear bumper
  • Structural support for boom in rest position, this position is identified thanks to a position detector

• Thanks to high quality painting of the subframe and aerial platform, all metal components are protected against corrosion. Standard colour: GREEN/WHITE

• Platform fixing to the vehicle subframe, hydraulic and electric connections, and ballasting, if necessary

12 MONTHS FROM DELIVERY DATE
The vehicle is guaranteed from the producer
• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams

• Emergency electropump 12/24V
• Additional magnetic yellow flashing beacon
• 60W white adjustable working light
• 12/24V electric power plug in basket (necessary for 60W working light)
• Tool box to be hanged outside the basket
• No.4 outriggers pads 300X300X30mm and No.2 supports
• Pre-arrangement for compressed air-water system
• Supplementary electric engine 230V for operation in closed areas
• Aluminium side panels H 200mm
• Rack for road signs with No.4 compartments mounted on the subframe
• Traffic cones support
• Special tool box L400xW300xH300mm (mounted on Porter Piaggio)
• Wheel chock
• Safety belts
• Heavy duty subframe for 4×4 trucks
• Fiberglass basket L1400xW700xH1100mm insulated up to 5000V with 90°+90° rotation
• Special colour (longer delivery time)
• Hydraulic plugs in basket and ground for high power hydraulic tools
• Fire Extinguisher