EUROSFILO
20 | 2 | 9 (11) JIB
Insulated DIN-DVE
Specific aerial platform for operations on live power lines in compliance with the DIN/VDE 1 kV standard
Truck-mounted aerial platforms, compliant with DIN VDE standards for 1 kV isolation, are used for aerial works, such as maintenance and installation on low-voltage power lines up to 1 kV. DIN VDE standards (Verband der Elektrotechnik, Elektronik und Informationstechnik) are German regulations and standards in the field of electrical engineering.
- WORKING HEIGHT 20 m
- MAX. LATERAL OUTREACH da 9 m a 11 m
- BASKET FLOOR 18 m
- CAPACITY 250 Kg
- HYDRAULIC OUTRIGGERS n.4
- ROTATION 360° continuous
- CONTROLS 100% HYDRAULIC LOW PRESSURE
- MINIMUM GVW PTT 5 ton
- INSULATION 1KV DIN/VDE
- Aerial platform made of high strength steel for boom maximum rigidity and maximum safety while working.
- The subframe with the aim to couple the platform with truck chassis.
- Hydraulic oil tank integrated in the subframe and easy to access.
- Stability guaranteed by No.4 outriggers “A” type, each pair is made by two hydraulic jacks with double effect valve connected to the main hydraulic circuit.
- Double purpose turret for boom support and rotation. One hydraulic engine coupled with one reducer allows 360° continuous rotation on fifth wheel. One rotating joint, assembled inside the turret, allows movements without hose twisting.
- The telescopic boom is made of 3 elements (1 fixed + 2 telescopic extensions). Hoses and pipes are positioned inside the boom structure for maximum protection against damages or accidental fall of tools, etc. The telescopic boom allows vertical and horizontal movements.
- Articulated boom (JIB) allows to clear obstacles in the working area. It is positioned at the end of the telescopic boom and gives the possibility even to work at a height in unreachable working position.
- Fiberglass basket insulated up to 1 kV. Against accidental contacts, mounted over fiberglass special insulators to grant even more safety for insulation between boon and basket. The basket is made to support and protect the operators. The aerial platform can be moved by controls positioned in the basket.
- 100% hydraulic controls with proportional system in low pressure (25 BAR only) to allow gradual and accurate movements. The hydraulic system in low pressure guarantees a long-lasting life to the platform with maintenance costs reduced at minimum. Electrically insulated controls inside the basket thanks to special fiberglass levers.
- Structure and boom are composed of hoses made of high strength steel to guarantee great stability to the whole platform.
- The steel structure and the booms are made of high strength steel to grant great stability to the whole platform.
- Moment limiting device: Lateral outreach up to 9m with 250kg (2 pers.) in the basket and lateral outreach up to 11m with 120kg (1 pers.)
- Dielectric Hoses
TECHNICAL DESCRIPTION OF STANDARD FEATURES
- • 100% hydraulic system with basket controls in order to guarantee the maximum reliability and to allow great accuracy in movements.
• For a longer and guaranteed service life of the hydraulic system all the switchable controls by the basket and all the hydraulic hoses positioned inside the booms that reach the distributor in the turret work in low pressure 25 Bar.
• Emergency controls from the ground.
• The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual maneuvers with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical components caused by rainy weather, humidity, frequent use, etc.
• The stop valves are directly mounted on each hydraulic cylinder.
Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers,
• respectively positioned in the following controls panels:
– basket: platform control board
– turret: platform control board for emergency only
– subframe: outriggers control board
- • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggersare not completely stabilized.
• Insulators: special insulators made of a non-conductive material that insulate all the mechanical connections to the turret.
In case of accidental contacts of the telescopic boom to power lines, the current does not pass through, truck and subframe are safe.
• Boom and outriggers block when the PTO in the cab is not engaged.
• Load sensing device
• Moment limiting device: Lateral outreach up to 9m with 250kg (2 pers.) in the basket and lateral outreach up to 11m with 120kg (1 pers.)
• Emergency hand pump allows every movement in case the main pump is damaged, it allows the return of the boomand outriggers in rest position; under truck flat battery condition.
• All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil inlet and outlet from the cylinder.
• Removable Magnetic yellow flashing beacon mounted on the vehicle cab.
• Warning light installed in the truck cab and indicating that the outriggers are not completely down.
• General emergency stop push-button.
• Thermal protective device for the electric system.
• Safety device to prevent the starter connection if the engine is on.
• Boom-cab anti-collision system + Basket-boom anti-collision system (buzzer and stop).
- • FIBERGLASS BASKET 200KG INSULATED UP TO 1 KV compliant with DIN VDE standards
• Basket hydraulic rotation: 90° + 90°
• 100% hydraulic system that allows 2 simultaneous movements
• Constant and gradual automatic leveling of the basket with independent hydraulic circuit
• Engine start & stop from the basket – special insulated device
• Warning light to center the boom in rest position
• Basket access bar with closing system by gravity
• Feet protective device h 15cm
• No.2 hooks for safety belts
- • No.4 outriggers with individual controls
• 100% hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
• Hydraulic distributor composed of No. 4 levers to simultaneously or individually open / close the outriggers
• Consent warning lights for outriggers
- • PTO AND HYDRAULIC PUMP GEAR TYPE
• Warning light inside the cab to indicate PTO on
• Hour counter in the cab to check the working hours and the frequency of the scheduled tests
- • Aluminium deck
• Ergonomic ladders mounted on the subframe to easily access the platform floor and the basket
• Rear bumper
• Support for boom in rest positiono
- Thanks to high quality painting of the subframe and aerial platform, all metal components are protected against corrosion. Standard colour: WHITE /GREEN
- Platform fixing to the vehicle subframe, hydraulic and electric connections, and ballasting, if necessary
12 MONTHS FROM DELIVERY DATE
The vehicle is guaranteed from the producer
• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams
- • KIT GROUNDING DEVICE
• Additional magnetic yellow flashing beacon
• 60W white adjustable working light
• Tool box to be hanged outside the basket
• No.4 outriggers pads 400X400X40mm and No.2 supports
• Pre-arrangement for compressed air-water system
• Supplementary electric engine 230V for operation in closed areas
• Waterproof stainless steel side cabinet L1100xW350xH350mm on the subframe
• Aluminium side panels H 200mm
• Rack for road signs with No.4 compartments mounted on the subframe
• Traffic cones support
• Wheel chock
• Safety belts
• Heavy duty subframe for 4×4 trucks
• Heavy duty subframe for installation on trucks from 6t up to 12t GVW
• Heavy duty subframe for installation on trucks over 12t GVW
• Fiberglass basket L1400xW700xH1100mm insulated up to 5000V
• Special colour (longer delivery time)
• Hydraulic plugs in basket and ground for high power hydraulic tools
• Fire Extinguisher
DO YOU WANT TO RECEIVE A
PERSONALIZED QUOTE?
Fill out the form with your details and we willprovide it to you a specific quote for your needs.
