EUROSKY-I 18|2|12
(115 KV) ANSI
Specific aerial platform for operations on live power lines in compliance with the ansi/sia 92.2 – 69-115 kv cat.B standard.
- WORKING HEIGHT 18 m
- MAX. LATERAL OUTREACH 12 m
- BASKET FLOOR 16 m
- MAX. BASKET CAPACITY 125 Kg + 125 Kg
- HYDRAULIC OUTRIGGERS n.4
- ROTATION 360° continuous
- CONTROLS 100% HYDRAULIC LOW PRESSURE
- MINIMUM GVW PTT 11 ton
- INSULATION 46-115KV ANSI/SIA 92.2
- Aerial platform made of high strength steel for boom maximum rigidity and maximum safety while working.
- The subframe with the aim to couple the platform with truck chassis.
- Hydraulic oil tank integrated in the subframe and easy to access.
- Stability guaranteed by No.4 outriggers, each pair is made by two hydraulic jacks with double effect valve connected to the main hydraulic circuit.
- Double purpose turret for boom support and rotation. One hydraulic engine coupled with one reducer allows 360° continuous rotation on fifth wheel. One rotating joint, assembled inside the turret, allows movements without hose twisting.
- Single pantograph to lift the platform without modifying the basket position in respect to the fifth wheel coupling center. The maximum height of the pantograph coincides with the maximum bridging height. The pantograph is made of 2 booms connected through a head with simultaneous movements.
- The telescopic boom is made of 2 elements (1 fixed + 1 telescopic extension) with telescopic section of the upper boom insulated up to 46-115KV. Hoses and pipes are positioned inside the boom structure for maximum protection against damages or accidental fall of tools, etc. The telescopic boom allows vertical and horizontal movements.
- Fiberglass basket composed by no.2 separate cages dim. L800XW600XH1100MM insulated up to 46-115KV. The
basket is made to support and protect the operators. The aerial platform can be moved by means of controls positioned in the basket. - 100% hydraulic controls with proportional system in low pressure (25 BAR only) in the basket to allow gradual and accurate movements. The hydraulic system in low pressure guarantees a long-lasting life to the platform with maintenance costs reduced at minimum.
- The steel structure and the booms are made of high strength steel to grant great stability to the whole platform.
TECHNICAL DESCRIPTION OF STANDARD FEATURES
-
- • 100% hydraulic system with basket controls in order to guarantee the maximum reliability and to allow great accuracy in movements.
• For a longer and guaranteed service life of the hydraulic system all the switchable controls by the basket and all the hydraulic hoses positioned inside the booms that reach the distributor in the turret work in low pressure 25 Bar.
• Emergency controls from the ground.
• The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual
maneuvers with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical
components caused by rainy weather, humidity, frequent use, etc.
• The stop valves are directly mounted on each hydraulic cylinder.
• Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers,
respectively positioned in the following controls panels:
– basket: platform control board
– turret: platform control board for emergency only
– subframe: outriggers control board
- • 100% hydraulic system with basket controls in order to guarantee the maximum reliability and to allow great accuracy in movements.
- • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggers are not completely stabilised.
• Boom and outriggers block when the PTO in the cab is not engaged.
• No need of any device to limit lateral outreach (100% SAFE): the operator can safely move within the whole working area with no need of any specific device that limits movements. Thanks to special design of our model, EVERY working position you can reach with the basket is ALWAYS inside the safe working area.
• Emergency hand pump allows every movement in case the main pump is damaged, it allows the return of the boom and outriggers in rest position; under truck flat battery condition.
• All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil
inlet and outlet from the cylinder.
• Removable Magnetic yellow flashing beacon mounted on the vehicle cab.
• Warning light installed in the truck cab and indicating that the outriggers are not completely down.
• Engine start & stop from basket and ground – special insulated device
• General emergency stop push-button.
• Thermal protective device for the electric system.
• Safety device to prevent the starter connection if the engine is on.
• Boom-cab anti-collision system + Basket-boom anti-collision system (buzzer and stop).
- • FIBERGLASS BASKET COMPOSED BY NO.2 SEPARATE CAGES EACH WITH CAPACITY 125KG+125KG
INSULATED UP TO 46-115K
• Basket hydraulic rotation: 90°+ 90°
• 100% hydraulic system that allows 2 simultaneous movements
• Constant and gradual automatic leveling of the basket with independent hydraulic circuit
• Engine start & stop from the basket
• Warning light to center the boom in rest position
• Basket access bar with closing system by gravity
• Feet protective device h 15cm
• No. 2 hooks for safety belts
- • No.4 outriggers with individual controls
• 100% hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
• Hydraulic distributor composed of No. 4 levers to simultaneously or individually open / close the outriggers
• Consent warning lights for outriggers
-
- • PTO AND HYDRAULIC PUMP GEAR TYPE
• Warning light inside the cab to indicate PTO on
• Mechanical or electrical clutch
• Hour counter in the cab to check the working hours and the frequency of the scheduled tests
- • PTO AND HYDRAULIC PUMP GEAR TYPE
- • Aluminium deck
• Ergonomic ladders mounted on the subframe to easily access the platform floor and the basket
• Rear bumper
• Support for boom in rest position
- Thanks to high quality painting of the subframe and aerial platform, all metal components are protected against corrosion. Standard colour: WHITE / GREEN
- Fixing of the aerial platform to the vehicle, hydraulic and electric connections, and ballasting, if necessary
12 MONTHS FROM DELIVERY DATE
The vehicle is guaranteed from the producer
• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams
- • FIBERGLASS BASKET 250KG
• WINCH
• KIT GROUNDING DEVICE
• BASKET LINER
• EMERGENCY PNEUMATIC PUMP
• HYDRAULIC PLUGS IN THE SUBFRAME AND IN THE BASKET FOR HIGH POWER HYDRAULIC TOOLS
• Additional magnetic yellow flashing beacon
• Tool box to be hanged outside the basket
• No.4 outriggers pads L400xW400xH40mm and No.2 supports
• Safety belt
• Heavy duty subframe for 4×4 trucks
• Heavy duty subframe for installation on trucks over 12 t GVW
• Special colour (longer delivery time)
• Fire Extinguisher (2kg)
DO YOU WANT TO RECEIVE A
PERSONALIZED QUOTE?
Fill out the form with your details and we willprovide it to you a specific quote for your needs.