SOLUZIONI PER LAVORARE IN ALTEZZA

Insulated Eurosky-I 19|2|13 aerial platform

EUROSKY 19 | 2 | 13
(46 KV) ANSI

Specific aerial platform for operations on live power lines in compliance with the ANSI/SIA 92.2 – 46 kV standard

  • WORKING HEIGHT 19 m
  • MAX. LATERAL OUTREACH  13 m
  • BASKET FLOOR 17 m
  • MAX. BASKET CAPACITY  250 Kg
  • HYDRAULIC OUTRIGGERS  n.4
  • ROTATIOn  360° continuous
  • CONTROLS  100% HYDRAULIC LOW PRESSURE
  • MINIMUM GVW  PTT 11 ton
  • INSULATION  46 KV ANSI/SIA 92.2
  •  Aerial platform made of high strength steel for boom maximum rigidity and maximum safety while working.
  •  The subframe with the aim to couple the platform with truck chassis.
  •  Hydraulic oil tank integrated in the subframe and easy to access.
  •  Stability guaranteed by No.4 outriggers, each pair is made by two hydraulic jacks with double effect valve connectedto the main
    hydraulic circuit.
  •  Double purpose turret for boom support and rotation. One hydraulic engine coupled with one reducer allows 360° continuous rotation on fifth wheel. One rotating joint, assembled inside the turret, allows movements without hose twisting.
  •  Single pantograph to lift the platform without modifying the basket position in respect to the fifth wheel coupling center. The maximum height of the pantograph coincides with the maximum bridging height. The pantograph is madeof 2 booms connected through a head with simultaneous movements.
  •  The telescopic boom is made of 2 elements (1 fixed + 1 telescopic extension) with telescopic section of the upper boom insulated up to 46 KV. Hoses and pipes are positioned inside the boom structure for maximum protection against damages or accidental fall of tools, etc. The telescopic boom allows vertical and horizontal movements.
  •  Fiberglass basket dim. L1192XW583XH1056MM insulated up to 46 KV. The basket is made to support and protect the operators. The aerial platform can be moved by means of controls positioned in the basket.
  •  100% hydraulic controls with proportional system in low pressure (25 BAR only) in the basket to allow gradualand accurate movements. The hydraulic system in low pressure guarantees a long-lasting life to the platform with maintenance costs reduced at minimum.
  •  The steel structure and the booms are made of high strength steel to grant great stability to the whole platform.

TECHNICAL DESCRIPTION OF STANDARD FEATURES

    • • 100% hydraulic system with basket controls in order to guarantee the maximum reliability and to allow great accuracy in movements.
      • For a longer and guaranteed service life of the hydraulic system all the switchable controls by the basket and all the hydraulic hoses positioned inside the booms that reach the distributor in the turret work in low pressure 25 Bar.
      • Emergency controls from the ground.
      • The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual maneuvers
      with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical components caused by
      rainy weather, humidity, frequent use, etc.
      • The stop valves are directly mounted on each hydraulic cylinder.
      • Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers, respectively
      positioned in the following controls panels:
      – basket: platform control board
      – turret: platform control board for emergency only
      – subframe: outriggers control board
  • • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggersare not completely stabilised.
    • Boom and outriggers block when the PTO in the cab is not engaged.
    • No need of any device to limit lateral outreach (100% SAFE): the operator can safely move within the whole working area
    with no need of any specific device that limits movements. Thanks to special design of our model, EVERY working position you can reach with the basket is ALWAYS inside the safe working area.
    • Emergency hand pump allows every movement in case the main pump is damaged, it allows the return of the boomand outriggers in rest position; under truck flat battery condition.
    • All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil inlet and outlet from the cylinder.
    • Removable Magnetic yellow flashing beacon mounted on the vehicle cab.
    • Warning light installed in the truck cab and indicating that the outriggers are not completely down.
    • Engine start & stop from basket and ground – special insulated device
    • General emergency stop push-button.
    • Thermal protective device for the electric system.
    • Safety device to prevent the starter connection if the engine is on.
    • Boom-cab anti-collision system + Basket-boom anti-collision system(buzzer and stop).
  • • FIBERGLASS BASKET WITH CAPACITY 250KG INSULATED UP TO 46 KV DIM: L1192XW583XH1056MM
    • Basket hydraulic rotation: 90°+ 90°
    • 100% hydraulic system that allows 2 simultaneous movements
    • Constant and gradual automatic leveling of the basket with independent hydraulic circuit
    • Engine start & stop from the basket
    • Warning light to center the boom in rest position
    • Basket access bar with closing system by gravity
    • Feet protective device h 15cm
    • No. 2 hooks for safety belts
  • • No.4 outriggers with individual controls
    • 100% hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
    • Hydraulic distributor composed of No. 4 levers to simultaneously or individually open / close the outriggers
    • Consent warning lights for outriggers
  • • PTO AND HYDRAULIC PUMP GEAR TYPE
    • Warning light inside the cab to indicate PTO on
    • Mechanical or electrical clutch
    • Hour counter in the cab to check the working hours and the frequency of the scheduled tests
  • • Aluminium deck
    • Ergonomic ladders mounted on the subframe to easily access the platform floor and the basket
    • Rear bumper
    • Support for boom in rest position
  • Thanks to high quality painting of the subframe and aerial platform, all metal components are protectedagainst corrosion. Standard colour: WHITE / GREEN
  • Fixing of the aerial platform to the vehicle, hydraulic and electric connections, and ballasting, if necessary
  • 12 MONTHS FROM DELIVERY DATE
    The vehicle is guaranteed from the producer
    • Use and maintenance manual
    • Spare parts manual
    • Hydraulic and electric diagramsi
  • • FIBERGLASS BASKET COMPOSED BY TWO SEPARATED CAGE 125KG + 125KG
    • WINCH
    • KIT GROUNDING DEVICE
    • BASKET LINER
    • EMERGENCY PNEUMATIC PUMP
    • HYDRAULIC PLUGS IN THE SUBFRAME AND IN THE BASKET FOR HIGH POWER HYDRAULIC TOOLS
    • Additional magnetic yellow flashing beacon
    • Tool box to be hanged outside the basket
    • No.4 outriggers pads L400xW400xH40mm and No.2 supports
    • Safety belt
    • Heavy duty subframe for 4×4 trucks
    • Heavy duty subframe for installation on trucks over 12 t GVW
    • Special colour (longer delivery time)
    • Fire Extinguisher (2kg)

DO YOU WANT TO RECEIVE A
PERSONALIZED QUOTE?

Fill out the form with your details and we will
provide it to you a specific quote for your needs.