Leopard 14 aerial platform

• 100% hydraulic basket controls in order to grant the maximum reliability and to allow great accuracy in movements.
• Emergency controls from the ground.
• Radio control for tracks and upper part
• Self Levelling and home function
• The fully hydraulic controls allow more simultaneous movements and provide more sensitivity in progressive and gradual maneuvers with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical components caused by rainy weather, humidity, frequent use, etc.
• The stop valves are directly mounted on each hydraulic cylinder.
• Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers, respectively positioned in the following controls panels:

– basket: aerial platform control panel

– ground: emergency control panel

By remote control:

– proportional movements of translation with double speed
– visual control of each single outrigger
– possibility to use the remote control on the basket and at the ground
– control of engine RPM to increase the maximum translation speed
– engine start and stop from the remote control
– possibility to lift the telescopic boom to increase the slope edge when loading or unloading from the truck

• • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggers are not completely stabilised.
  • No need of any device to limit lateral outreach (100% SAFE): the operator can safely move within the whole working area with no need of any specific device that limits movements. Thanks to special design of our model, EVERY working position you can reach with the basket is ALWAYS inside the safe working area.
  • Emergency hand pump allows every movement in case the main pump is damaged, it allows the return of the boom and outriggers in rest position; under truck flat battery condition.
  • All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil inlet and outlet from the cylinder.
  • General emergency stop push-button (basket and ground).
  • Thermal protective device for the electric system.

  Safety device to prevent the starter connection if the engine is on.

• Aluminium basket dimensions: L1100xW700xH1100mm
• 100% hydraulic system that allows more simultaneous movements
• Constant and gradual automatic leveling of the basket with independent hydraulic circuit
• Engine start & stop from the basket
• Electric power tap in the basket 230V with relative electric power tap in the turret
• Basket access bar with closing system by gravity
• Feet protective device H15cm
• No.2 hooks for safety belts

• No. 4 outriggers 
• 100% electro-hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
• Hydraulic distributor made of No.4 levers to simultaneously or individually open / close the outriggers
• Level bubble mounted in the subframe

• • Pump, gear type, flow rate of 20lt/min. with engine at idle speed
  • Hour meter in the cab to monitor working hours and the frequency of scheduled tests

• Thanks to high quality painting of the subframe and aerial platform, all metal components are protected against corrosion. Standard colour: WHITE/GREEN

12 MONTHS FROM DELIVERY DATE

• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams

• LITHIUM BATTERY
• Tool box to be hanged outside the basket
• No.4 outriggers pads and no.2 supports
• Pre-arrangement for compressed air-water system
• Automatic and independent stabilization of the outriggers
• Supplementary electric engine 230V for operation in closed areas
• Safety belt
• Special colour (longer delivery time)
• Non-marking CRAWLER TRACK
• Cover for outriggers cylinder LEOPARD
• Cover for boom cylinder LEOPARD