SOLUZIONI PER LAVORARE IN ALTEZZA

Pick Up Solutions X4 12 aerial platform

PICK UP SOLUTIONS
X4  12

The X4 12 aerial platform installed on a pick-up is the ideal solution for working safely at a height of up to 12 meters with a horizontal reach of 4.5 metres.

  • WORKING HEIGHT 12 m
  • MAX. LATERAL OUTREACH  4,5 m
  • BASKET FLOOR 10 m
  • BRIDGING HEIGHT 5 m
  • MAX. BASKET CAPACITY  150 Kg – 1 persona
  • HYDRAULIC OUTRIGGERS  n.2
  • ROTATION  180°
  • CONTROLS  100% HYDRAULIC
  • MINIMUM GVW  PTT 2,9 ton
  •  Aerial platform made of high strength steel for boom maximum rigidity and maximum safety while working.
  •  The subframe with the aim to couple the platform with truck chassis.
  •  Hydraulic oil tank in easy to reach position to check and restore the oil level.
  •  Stability is given by No.2 outriggers; the pair is made of two hydraulic jacks with double effect valve connected to themain hydraulic circuit.
  •  Double purpose turret for boom support and rotation. It is positioned on the subframe and allows the rotation, thanks to a system activated by one hydraulic engine and one fifth wheel coupling. Inside there is a piston that lifts the pantograph.
  •  The pantograph with the aim to open the platform by lifting the telescopic boom. The maximum height of the pantograph coincides with the maximum bridging height. The pantograph is made of 2 booms connected through a head with simultaneous movements.
  •  The telescopic boom is made of 2 elements (1 fixed + 1 telescopic extension). Hoses and pipes are positioned inside the boom structure for maximum protection against damages or accidental fall of tools, etc. The telescopic boom allows vertical and horizontal movements.
  •  The basket is made to support and protect the operators. The aerial platform can be moved by means of controls positioned on the basket.
  •  Free space on the rear flat bed for working tools and materials.
  •  100% hydraulic controls to allow gradual and accurate movements. The hydraulic system guarantees a long-lastinglife to the platform with maintenance costs reduced to its minimum.
  •  The steel structure and the booms are made of high strength steel to grant great stability to the whole platform.

TECHNICAL DESCRIPTION OF STANDARD FEATURES

    • • 100% hydraulic system with basket controls in order to grant the maximum reliability and to allow great accuracyin movements.
      • For a longer and guaranteed service life of the hydraulic system all the switchable controls by the basket and all the hydraulic hoses positioned inside the booms that reach the distributor in the turret work in low pressure 25 Bar.
      • Emergency controls from the ground.
      • The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual
      maneuvers with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical
      components caused by rainy weather, humidity, frequent use, etc.
      • The stop valves are directly mounted on each hydraulic cylinder.
      • Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers,
      respectively positioned in the following controls panels:
      – basket: platform control board
      – carter: platform control board for emergency only
      – subframe: outriggers control board
  • • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggersare
    not completely stabilised.
    • Boom and outriggers block when the electric clutch is not engaged.
    • NO NEED of any device to limit lateral outreach (100% SAFE): the operator can safely move within the whole working
    area with no need of any specific device to limit movements. Thanks to the special design of the model, EVERY working
    position you can reach with the basket is ALWAYS inside the safe working area.
    • Emergency hand pump allows every movement in case the main pump is damaged; it allows the return of the boomand
    outriggers in rest position; under truck flat battery condition.
    • All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil
    inlet and outlet from the cylinder.
    • Warning light installed in the truck cab and indicating that the outriggers are not completely down.
    • General emergency stop push-button (basket and ground).
    • Thermal protective device for the electric system.
    • Safety device to prevent the starter connection if the engine is on.
    • Boom-cab anti-collision system (buzzer and stop).
  • • Aluminium basket dim: L800xW700xH1100mm
    • 100% hydraulic system that allows 2 simultaneous movements
    • Constant and gradual automatic leveling of the basket with independent hydraulic circuit
    • Engine start & stop from the basket
    • Warning light to center the boom in rest position
    • Electric power tap in the basket 230V with relative electric power tap in the turret
    • Basket access bar with closing system by gravity
    • Feet protective device H15cm
    • No.2 hooks for safety belts
    • Ladders to easily access the basket
  • • No.2 outriggers with individual controls
    • 100% hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
    • Hydraulic distributor made of No.2 levers to simultaneously or individually open/close the outriggers
    • Consent warning lights for outriggers
    • Warning lights for the proper closing of the outriggers to safely drive on the road
  • • ELECTRIC CLUTCH AND HYDRAULIC PUMP
    • Warning light inside the cab to indicate electric clutch activated
    • Hour counter in the cab to check the working hours and the frequency of the scheduled tests
  • Thanks to high quality painting of the subframe and aerial platform, all metal components are protected against corrosion. Standard colour: WHITE/GREEN

12 MONTHS FROM DELIVERY DATE
The vehicle is guaranteed from the producer
• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams

  • • CUSTOMIZED REAR BOX
    • Emergency electropump 12/24V
    • Additional magnetic yellow flashing beacon
    • 60W white adjustable working light
    • 12/24V electric power plug in basket (necessary for 60W working light)
    • Tool box to be hanged outside the basket
    • No.2 outriggers pads 300X300X30mm and No.1 supports
    • Pre-arrangement for compressed air-water system
    • Supplementary electric engine 230V for operation in closed areas
    • Special tool box L400xW300xH300mm
    • Waterproof stainless steel side cabinet L1100xW350xH350mm on the subframe
    • Aluminium side panels H 200mm
    • Rack for road signs with No.4 compartments mounted on the subframe
    • Traffic cones support
    • Wheel chock
    • Safety belts
    • Heavy duty subframe for 4×4 trucks
    • Heavy duty subframe for installation on trucks from 6t up to 12t GVW
    • Heavy duty subframe for installation on trucks over 12t GVW
    • Special colour (longer delivery time)
    • Hydraulic plugs in basket and ground for high power hydraulic tools
    • Fire Extinguisher

• Subframe group fully mounted and complete with hydraulic and electric components
• Pantograph + boom group fully mounted and complete with hydraulic and electric components
• Aluminium basket L800xW700xH1100mm group fully mounted with hydraulic and electric components
• Oil tank and filters
• Body with aluminium deck
• Standard colour: WHITE/GREEN
• Mounting instructions
• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams
• Labels
NOT INCLUDED IN KIT:
• Hydraulic pump
• Power take-off
• Mounting
• Final Test

DO YOU WANT TO RECEIVE A
PERSONALIZED QUOTE?

Fill out the form with your details and we will
provide it to you a specific quote for your needs.