SOLUZIONI PER LAVORARE IN ALTEZZA

Xtractor 12 aerial platform

XTRACTOR 12
2 persons

X Tractor, the 12 meter aerial platform designed to be transported and used with tractors. This innovative solution allows the use of the platform both in the agricultural sector and in the activities of municipal companies. Thanks to its versatility and ability to adapt to different needs, X Tractor proves to be a precious ally for carrying out a wide range of tasks, from agricultural work to urban maintenance. With X Tractor, efficiency and flexibility meet the power and reliability of the tractor, offering practical and convenient solutions for a variety of applications.

  • WORKING HEIGHT 11,6 m
  • MAX. LATERAL OUTREACH  4,5 m
  • BASKET FLOOR 9,6 m
  • BRIDGING HEIGHT 5 m
  • MAX. BASKET CAPACITY  200 Kg – 2 persons
  • HYDRAULIC OUTRIGGERS  n.4
  • ROTATION  180°
  • CONTROLS  100% HYDRAULIC LOW PRESSURE
  • MIN. SUPPORT BASE  2400 x 1850 mm
  • CAPACITY TRACTOR LIFT 30 KN
  • TOT. WEIGHT 1600 kg
  •  Aerial platform made of high strength steel for boom maximum rigidity and maximum safety while working.
  •  The aerial platform is removable and it can be mounted on every type of TRACTOR by fixing it to the third point and the lifting point.
  •  Hydraulic pump equipped with kit to be directly fixed to the PTO.
  •  The subframe anchors the aerial platform to the tractor though tractor lifts and third point, and stabilises the aerial platform to the ground through the outriggers.
  •  Stability is given by No.4 IN-SHAPE outriggers; each pair is made of two hydraulic jacks with double effect valve connected to the main hydraulic circuit.
  •  Turret positioned on the subframe for boom support and rotation of 180°. Inside there is a piston that lifts the pantograph.
  •  The pantograph with the aim to open the platform by lifting the telescopic boom. The maximum height of the pantograph coincides with the maximum bridging height of 5m. The pantograph is made of 2 booms connected through a head with simultaneous movements.
  •  The telescopic boom is made of 2 elements (1 fixed + 1 telescopic extension). Hoses and pipes are positioned inside the boom structure for maximum protection against damages or accidental fall of tools, etc. The telescopic boom allows vertical and horizontal movements.
  •  The basket is made to support and protect the operators. The aerial platform can be moved by means of controls positioned on the basket.
  •  Hydraulic oil tank in easy to reach position to check and restore the oil level.
  •  100% hydraulic controls to allow gradual and accurate movements. The hydraulic system guarantees a long-lasting life to the platform with maintenance costs reduced to its minimum.
  •  The steel structure and the booms are made of high strength steel to grant great stability to the whole platform.

TECHNICAL DESCRIPTION OF STANDARD FEATURES

  • • 100% hydraulic system with basket controls in order to grant the maximum reliability and to allow great accuracy
    in movements.
    • For a longer and guaranteed service life of the hydraulic system all the switchable controls by the basket and all the hydraulic hoses positioned inside the booms that reach the distributor in the turret work in low pressure 25 Bar.
    • Emergency controls from the ground.
    • The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual maneuvers with respect to the electro-hydraulic controls. Fully hydraulic controls are free of any damage to electrical components caused by rainy weather, humidity, frequent use, etc.
    • The stop valves are directly mounted on each hydraulic cylinder.
    • Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers, respectively positioned in the following controls panels:
    – basket: platform control board
    – carter: platform control board for emergency only
    – subframe: outriggers control board
  • • Interlock outriggers-boom: Outriggers block when the boom is not in rest position + Boom block when outriggers are not completely stabilised.
    • Boom and outriggers block when the PTO in the cab is not engaged.
    • There is NO NEED of any device to limit lateral outreach (100% SAFE): the operator can safely move within the whole working area with no need of any specific device that limits movements. Thanks to the special design of our model, EVERY working position you can reach with the basket is ALWAYS inside the safe working area.
    • Emergency hand pump allows every movement in case the main pump is damaged; it allows the return of the boom and outriggers in rest position; under truck flat battery condition.
    • All movements are obtained through hydraulic double-acting jacks with double effect safety valves checking both the oil inlet and outlet from the cylinder.
    • General emergency stop push-button (basket and ground).
    • Thermal protective device for the electric system.
  • • Aluminium basket dim: L1000xW700xH1100mm (2 pers.)
    • 100% hydraulic system that allows 2 simultaneous movements
    • Electric power tap in the basket 230V with relative electric power tap in the turret
    • Constant and gradual automatic leveling of the basket with independent hydraulic circuit
    • Warning light to center the boom in rest position
    • Basket access bar with closing system by gravity
    • Feet protective device H15cm
    • No.2 hooks for safety belts
    • Ladders to easily access to the basket
  • • No.4 IN-SHAPE outriggers with individual controls
    • 100% hydraulic movement controls independent and separate to perfectly level the machine even on uneven ground
    • Hydraulic distributor made of No.4 levers to simultaneously or individually open / close the outriggers
    • Consent warning lights for outrigger
    • Warning lights for the proper closing of the outriggers to safely drive on the road
  • • HYDRAULIC PUMP + CARDAN SHAFT/PTO
    • Hour counter in the cab to check the working hours and the frequency of the scheduled tests
  • Thanks to high quality painting of the subframe and aerial platform, all metal components are protected against corrosion

12 MONTHS FROM DELIVERY DATE
• Use and maintenance manual
• Spare parts manual
• Hydraulic and electric diagrams

  • • Emergency electropump 12/24V
    • Additional magnetic yellow flashing beacon
    • 60W white adjustable working light
    • 12/24V electric power plug in basket (necessary for 60W working light)
    • Tool box to be hanged outside the basket
    • No.4 outriggers pads 300X300X30mm and No.2 supports
    • Pre-arrangement for compressed air-water system
    • Supplementary electric engine 230V for operation in closed areas
    • Aluminium side panels H 200mm
    • Rack for road signs with No.4 compartments mounted on the subframe
    • Traffic cones support
    • Safety belts
    • Fiberglass basket L1400xW700xH1100mm insulated up to 5000V
    • Fiberglass basket L1400xW700xH1100mm insulated over 5000V
    • Special colour (longer delivery time)
    • Fire Extinguisher (2kg)

DO YOU WANT TO RECEIVE A
PERSONALIZED QUOTE?

Fill out the form with your details and we will
provide it to you a specific quote for your needs.